French 133 R - LSD - Short Gear - Ohlins R2 shocks - ...

[mazmaz]

mod :
LSD
Short gear
Vibratec dog bone
Carbon bonnet
removed air con
lighter water radiator
Decat Exhaust manifold
lightened flywheel
R2 Front shocks
R2 evo rear shocks
adjustable (camber) shock top mount
Oil water heat exchanger
Dry Odissey battery
rigid wishbone mount
RC6 break pad
Braided Brake line
removed back steats and plastic
15" evo corse xma3
adjusted inlet manifold
rear omp bar
various cosmetics

on going mod :
Oreca steering wheel (to be fitted)
Sabelt seats (still lot of work for them with custom fix)
plastic windows (not the front) (to be fitted)
Bulb (IPF LBX Clear) (stalled by a dumbass neighbors :evil
Lithium battery (to be fitted)
Oil pressure sensor (half fitted)
Reprog

this is passenger side

(right side of the car for air intake for brake will be modified soon so i don't guive picture )

before

after (not totaly finish on this picture)

thx for Imageshack for deleting all the pictures...

 

[madmatt]

Looks good

Are you looking at taking it to trackdays?

I would keep on checking your KTec filter, a lot of people have had problems with them.

The BRC Filter is highly rated

M

 

[mazmaz]

my ktec filter is damaged, like everyone


i will replace it by BMC one when i will save money


i'v just recieve 4 totyo R888 for track day , but I have not found wheel i'm looking for actualy (Speedline for clio cup)

 

[madmatt]

I'm sure you'll like the 888s.

The Renault Turini's are quite hard to find at a decent price.

Ktec are selling a few of their cup wheels on Ebay, might be worth a look.

 

[middo]

did you have a go at matching both the upper and lower inlets?

My mate had his plenum matched on his k4m clio and that responded well so was interested to see when people on here started having a go at it

 

[Karl]

Check ya filter mate

engine-gearbox-exhaust-air-intake-system/ktec-panel-filter-issue-t846.html

 

[mazmaz]

did you have a go at matching both the upper and lower inlets?

My mate had his plenum matched on his k4m clio and that responded well so was interested to see when people on here started having a go at it

i match both but the lower inlet is the one that have to be the most focus on, because is thery bad looking...

 

[mazmaz]

 

[Al]

Very nice, some similar things to myself which is always great to see!

A 225 footrest is that?

Do you have any front shots of the car with the brake ducts fitted?

Also, what is on the floor of the passenger side?

 

[mazmaz]

i think it's a clio3rs footrest

on the floor it's the water tank for the windshield washer
i remove it from the front bumper

i will redone the right side one soon, with different air intake solution

 

[madmatt]

I like what you've done with the ducts, looks nice and stealthy.

It's certainly shaping up to be a good car, good focus on improved weight distribution.

 

[Al]

Very nice indeed!

The 225 and Clio3 have the same part I believe.

I like the idea with the water bottle; I've always thought in it's current position it could be better weight distributed. I may consider moving mine under the Recaro's It would just be a case of making the pipelines/loom a bit longer. Top work bud!

 

[pritchp]

Amazing work!

 

[FaBiO 180]

good works!!!!

 

[maggi200]

Looks great!

Sorry to thread jack, but summin i just noticed i'm not sure on. The box to the right of the battery which the bonnet thingy hooks to. What is it?

 

[Matt]

Looks like the battery terminals with some extra cable = battery in boot? If so.. is it worth it? Been considering...

 

[Al]

Looks like the battery terminals with some extra cable = battery in boot? If so.. is it worth it? Been considering...

+1. I was considering behind passengers seat. Wherever you have put it I'd like some photos please

 

[mazmaz]

sorry i alsways forgot to take photo (i was in urry for the modification so no time to take photo )

the battery is under the seat actually

it's an odyssey 680

 

[Al]

sorry i alsways forgot to take photo (i was in urry for the modification so no time to take photo )

the battery is under the seat actually

it's an odyssey 680

Can you get a photo please? And maybe one or the connection terminals and also where it passes through the firewall?

 

[Matt]

Second that, please show us how you've routed the cable

Even weight distrubution + more room for filters = have to mod.