Bypass airbag sensor seats

Twingo Forum

Help Support Twingo Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jarre

Well-known member
Joined
Apr 18, 2013
Messages
265
Reaction score
0
Location
Belgium
Does anyone know how to bypass the airbag sensors of the front seats?
i have other seats but now the lights stay on because they don't have an airbag :mrgreen: :roll:
 
ok... i am an electrical noob :D

so i have to buy 2amp fused 3ohm resistors and just connect it like on the picture i suppose... :D
nothing plug&play that exists?
 
i used the resistors as described. i saw the airbag plug has 6 connections in it. tested them all but lights stays on.
used the last and next one and suddenley the resistor caught fire LOL

i failed :D

anyone suggestions?
 
2amp fuses and 3.3 ohm resistors. either crimp them onto the fuse terminals or solder them on and cover with electrical tape. insert them into the same pin holes as neil has done in the very first picture > turn off ignition > turn ignition back on & start the engine and the SRS airbag light should go out as it's a self diagnosing system :)
 
Top