Search results

I need to change my inner Tie rods as the joints are worn but I can't find any specific advice on the process. Had anyone done this before and have any advice? I will be changing the tie rod ends too as they are seized, I've done this before on other cars and is quite straight forward. Sent...

Hi, After having to do this recently I thought I'd post up how to do this. I have a Twingo RS 133 2009 model. wing mirror cover To remove this you need to remove the glass and you will see 4 tabs which hold the cover on. You need to push them down and then pull the cover off. I found using 4...

Has anyone found an uprated clutch for the 133? I can find lots for the 1.2 but none for the 1.6. Is the standard Renault one ok if you have had power increases?

Hi all, Got my 133 remapped with k-tec and it was well worth the money, the car feels so much smoother and does not feel like it is struggling. Really noticeable in the midrange. Managed to get an extra 10bhp from it as well!

Been servicing the car and just wondered what this is, looks like some kind of breather hose for the gear box.

Does any one know how to replace it, I have managed to get tools to fit in the gap to undo the bolt but as far as I can tell it is too big to remove. Does the engine have to be lifted or dropped? Any help would be greatly appreciated. :-)

Just made myself a tool to try and undo the ball joint using the dimples in the bottom. I have a feeling its not going to go as planned

Hi, I use torque Pro for my other car and I have seen that you can buy an additional plug in for Renault to read additional sensors. Has anyone used this? It does not list the twingo in the cars tested and I dont want to buy it if won't work.

Hi, I bought in error Genuine Renault mud flaps, front and rear for my 133. These will not fit the 133 with the skirts and arches. They will fit the standard Twingo 2007 on. Brand new in box, never used or fitted, black in colour. SOLD

Hi, I have been checking my engine over and the MAP sensor (Top left of intake manifold) appears to be a little wobbly / loose. Is this normal? I would have expected it to be a tight sealed fit. Thanks in advance

I just took the gear stick gaitor and surround off and discovered this spare connector / plug. Anyone know what its for?

Hi, I have been told my axillary drive belt needs replacing, I have a new belt and just wondered if it is possible to DIY change the belt in situ or does it need the engine moving to access it? I have a 2009 RS 133 1.6 Thanks in advance :)

After noticing a slight misfire and lumpy idle I decided to change my plugs. This is what I found... Looks like I had the water ingress problem and they were not the recommended plugs either. Made sure I used some contralube when refitting to keep the water out.

Hi all, Just purchased a 2009 model today, collecting it next weekend. Even has Bluetooth radio [emoji1] I want to change the steering wheel as it's like a van wheel, if anyone can point me in the right direction of what will fit that would be great [emoji2] Nick