It is currently Fri Nov 27, 2020 11:27 pm


Post a new topicPost a reply Page 10 of 10   [ 247 posts ]
Go to page Previous  1 ... 6, 7, 8, 9, 10
Author Message
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Wed Jan 29, 2014 11:31 am 
Registered User
Registered User
User avatar

Joined: Tue Mar 19, 2013 2:23 pm
Posts: 178
Location: Bremervörde
Gender: Male
Car: Twingo RS CUP
I have an 2009 and Friday my mechanic will try to put the Temperature and Clock on the Speedo-Display too.... now im unsure this will work.


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Thu Jan 30, 2014 4:55 am 
Registered User
Registered User
User avatar

Joined: Mon Sep 10, 2012 2:18 pm
Posts: 599
Location: Central Scotland, UK
Gender: Male
Car: Gordini TCE
the reason the rs monitor displays oil temp and a scan guage doesn't is because the twingo doesn't actually have an oil temp sensor, the rs monitor estimates it based on coolant temperature


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Fri Jan 31, 2014 10:31 am 
Registered User
Registered User
User avatar

Joined: Mon Jul 04, 2011 6:51 am
Posts: 168
Location: Slovenia
Car: Twingo RS 133
Twingogangster83 : It should be no problem.. done in few seconds if the tehnician know what hes doing :D

Martin_172 : But water temperature stays the same in some time and oil temp. goes higher or down ...

hmmmm ...


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Fri Jan 31, 2014 2:58 pm 
Registered User
Registered User
User avatar

Joined: Tue Nov 02, 2010 3:44 pm
Posts: 145
Location: Greece
Car: Blue twingo rs 133 sport
As martin and ozio said there is not sensor.

I have a 2009 twingo withe oem blutooth etc I have to change the monitor? It works only with the facelifts?


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Fri Jan 31, 2014 3:20 pm 
Registered User
Registered User
User avatar

Joined: Mon Jul 04, 2011 6:51 am
Posts: 168
Location: Slovenia
Car: Twingo RS 133
Yes , you will need to buy RS monitor .... Works on all RS ...


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Fri Jan 31, 2014 5:57 pm 
Registered User
Registered User
User avatar

Joined: Tue Nov 02, 2010 3:44 pm
Posts: 145
Location: Greece
Car: Blue twingo rs 133 sport
Thanks!!! :D


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Mon Mar 24, 2014 7:14 pm 
Registered User
Registered User
User avatar

Joined: Fri Feb 28, 2014 6:05 pm
Posts: 6
Gender: Male
Another happy Gordini owner :D
Ordered the RS display, installed it myself. I went to my Renault dealer with the instructions for the Clip tool and 10min later, i have the RS monitor working in the Dini 8-)

Many thanks for the information overhere! :mrgreen:


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Thu Sep 18, 2014 9:26 pm 
Registered User
Registered User
User avatar

Joined: Thu Sep 18, 2014 7:54 pm
Posts: 12
Location: Ceredigion, Wales
Gender: Female
Car: Twingo 133
Ok I have a 09 RS 133 with normal display..... could I upgrade to a RS Monitor? Or is there another way of getting water/ oil temp display in the car????

Many thanks


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Thu Sep 18, 2014 9:34 pm 
Registered User
Registered User
User avatar

Joined: Sat Aug 31, 2013 1:57 pm
Posts: 2751
Gender: Male
Car: GT with Subaru / Mugen fettish
Cass Bach wrote:
Ok I have a 09 RS 133 with normal display..... could I upgrade to a RS Monitor? Or is there another way of getting water/ oil temp display in the car????

Many thanks


are you into aftermarket gadgetry? there are plenty of OBD displays on the market that come in pod gauge formats which you could hook up next to your tachometer :) or on your pillar. some of them are pretty cool


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Wed Nov 05, 2014 5:14 pm 
Registered User
Registered User
User avatar

Joined: Wed Oct 29, 2014 4:22 pm
Posts: 6
Location: Zagreb, Croatia
Gender: Male
Car: Twingo RS133 CUP
i read whole topic and I understand most of it but to be 100% certain I have twingo CUP 2008 , this is what I have in my car.
Attachment:
20141020_154159.jpg
20141020_154159.jpg [ 102.77 KiB | Viewed 9014 times ]

So, will R.S. monitor work and can it work with aftermarket radio? If I leave the OEM HU what functions will i lose?


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Fri Nov 07, 2014 3:41 pm 
Registered User
Registered User
User avatar

Joined: Wed Oct 29, 2014 4:22 pm
Posts: 6
Location: Zagreb, Croatia
Gender: Male
Car: Twingo RS133 CUP
anybody? :?


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Fri Nov 07, 2014 4:50 pm 
Registered User
Registered User
User avatar

Joined: Sat Jan 08, 2011 10:41 am
Posts: 257
Location: Bratislava/Slovakia
Car: Twingo 133 RS with Cup chasiss
as far as i know, you need an upgrated electrical loom, which was standard in models from 2011+... if you check this thread and find someone with car older than 2011, try asking them directly via PM ;)


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Tue Jan 06, 2015 8:07 pm 
Registered User
Registered User
User avatar

Joined: Thu Dec 04, 2014 10:17 am
Posts: 115
Location: Bruges, Belgium
Gender: Male
Car: Blue Twingo RS133 FF
How do I know if I have a bluetooth radio? because I don't get any of these things here :lol:
I have a 2010 RS133 (no cup chassis)


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Fri Mar 06, 2015 7:37 pm 
Registered User
Registered User

Joined: Sun Feb 01, 2015 5:15 pm
Posts: 6
Gender: Male
Car: Twingo RS
Hello, sorry for my english but i'm italian.

I would like to fit the Rs Monitor on my Twingo RS 2010.

I have this radio

Image

It is the 3rd type of pdf but of black finish. I don't know if change something from the silver one.

The dispay i got now is this

Image

It should be 100% compatible, not?

I have only to buy the RS Monitor with this code: 280347874R

Then plug in where was the old monitor and reprogramm at Renault.

1. select the 653 ECU (multimedia ecu)
2. go into programming mode (upper right icon with some tools on it)
3. select "write configuration" on the left side menu ( second icon from the top under the home )
4. Select CF001 from the menu on the right and re-calibrate the newly installed RS Monitor
5. turn radio OFF in de ECU365
6. After doing that you can re-configure the language of the screen and thats about it.

Is right?

Some other question:
- what button do you press to activate the rs monitor after turning on the radio?
- can i still manage the radio menù?


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Sun Jul 19, 2015 9:31 pm 
Registered User
Registered User

Joined: Sun Jul 19, 2015 7:48 pm
Posts: 1
Gender: Male
Hi. Im going to buy a twingo133 soon. But do i need to buy a newer twingo 2010-> to fit renault monitor?
Or can i buy a 2009, buy monitor, and buy aftermarked stereo?


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Mon Jun 24, 2019 10:03 pm 
Registered User
Registered User

Joined: Sun Nov 04, 2018 9:57 pm
Posts: 8
Gender: Male
Car: T133
I'm planning to order the RS monitor for my TRS (2010, BT radio) but one thing is not completely clear for me. Please clarify it somebody: after the RS monitor is fitted, the Bluetooth radio can be used, the input device (aux, BT phone etc) can be selected, the actual song / volume etc. is displayed on the monitor, telephone call can be started through the display (so the RS monitor works like the 'original' radio display) except when RS monitor functions (lap time, G-force etc.) are activated, in this case only the RS functions work. Is it right?


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Sat Sep 14, 2019 1:50 pm 
Registered User
Registered User

Joined: Sun Nov 04, 2018 9:57 pm
Posts: 8
Gender: Male
Car: T133
After I had replaced the radio display for a RS monitor in my Twingo133 I went to the local Renault dealer to get it activated (after replacing, the RS monitor did not work at all). They could not activate or reprogram it, despite I showed them the description I found in this thread. The Renault mechanic could only get it work as a normal radio display :( I was so disappointed that finally I have bought a Renault Can Clip diagnostic tool for myself to get the monitor work. It arrived this Monday. I had tried it immediately and after some minutes RS monitor worked like it should have done from the beginning :). Well, I think the description in the thread is not enough clear and contains a misspelling - there is no ECU 365, there is only ECU 653, it is the multimedia ECU. It is much easier if you run a self-diagnostic in the multimedia section, it will find the "new" hardware. After this you have to go into programming mode (select CF001 from the menu on the right as it is written in the description) and activate it and turn the radio OFF. After it is activated you have to select the unit of length (km or mile) AND language of the monitor. Hope this helps.


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Sun Sep 29, 2019 6:13 am 
Registered User
Registered User

Joined: Thu Jun 27, 2019 10:27 am
Posts: 7
Gender: Male
Car: Twingo II Rs
I don't have an bluetooth. Do i need it to rs monitor? Twingo 2009


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Fri Feb 21, 2020 3:08 pm 
Registered User
Registered User

Joined: Mon Jul 06, 2015 11:33 am
Posts: 5
Gender: Male
I have been looking into buying the Renault Sport monitor for my 2012 Twingo 133. Before I go ahead and purchase the monitor I thought I best speak to the local Renault dealers who have both told me that cannot programme this as it isn't something that they advise doing. I told them that it is a genuine Renault part but still they said no.

Does anyone know of anyone in the West Midlands area who could programme the monitor?


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Mon Oct 05, 2020 8:14 am 
Registered User
Registered User

Joined: Mon Oct 05, 2020 6:13 am
Posts: 1
Gender: Male
Car: Renault Clio RS200 MK3
Yanoo wrote:
After I had replaced the radio display for a RS monitor in my Twingo133 I went to the local Renault dealer to get it activated (after replacing, the RS monitor did not work at all). They could not activate or reprogram it, despite I showed them the description I found in this thread. The Renault mechanic could only get it work as a normal radio display :( I was so disappointed that finally I have bought a Renault Can Clip diagnostic tool for myself to get the monitor work. It arrived this Monday. I had tried it immediately and after some minutes RS monitor worked like it should have done from the beginning :). Well, I think the description in the thread is not enough clear and contains a misspelling - there is no ECU 365, there is only ECU 653, it is the multimedia ECU. It is much easier if you run a self-diagnostic in the multimedia section, it will find the "new" hardware. After this you have to go into programming mode (select CF001 from the menu on the right as it is written in the description) and activate it and turn the radio OFF. After it is activated you have to select the unit of length (km or mile) AND language of the monitor. Hope this helps.

Thanks mate for the clarification. I am planning to buy the RS Monitor for my Clio RS200 MK3.


Top
 Profile  
 
 Post subject: RS monitor nice and cheap ??
PostPosted: Tue Nov 10, 2020 9:39 pm 
Registered User
Registered User

Joined: Sat Aug 29, 2020 9:09 pm
Posts: 4
Location: Coningsby
Gender: Male
Car: 133, 924S, Smart Roadster, MGF VVC
Sorry to rejuvenate this well-read thread.

https://www.facebook.com/stagexmotorsport/posts/2208002459412245

Been chatting to them, they are saying they can do this for £100 if you send them your display. I asked if I need to buy part 280347874R first but they say it's just programming.

On start up my display says 'Renault', not 'renaultsport'.

I'm right that the hardware needs to be added and it's not just a programming job ?

I have a 2009 RS with bluetooth stereo.


Top
 Profile  
 
 Post subject: Re: RS monitor subsequently installed!
PostPosted: Thu Nov 19, 2020 4:36 pm 
Registered User
Registered User

Joined: Wed Mar 25, 2020 9:15 pm
Posts: 1
Gender: Male
I have just bought a 2012 TRS with a bluetooth radio. I was hoping that this meant that I would have the monitor too, particularly as the car even has a manual explaining how to use it.

The trouble is that pressing both top buttons on the remote stalk doesn't do anything. Does this simply mean that I don't have it? What on earth do i need to do to activate, or otherwise install this? It seems a weird thing for Renault to make so difficult to obtain!

Cheers


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 10 of 10   [ 247 posts ]
Go to page Previous  1 ... 6, 7, 8, 9, 10


Who is online

Users browsing this forum: ashtester, Gianluca, Ratxa, shippo and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
610nm Style by Daniel St. Jules of Gamexe and modified by Matt of Twingo133.net


phpBB SEO