Scangauge and PID's

Twingo Forum

Help Support Twingo Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ti_saoil

Member
Joined
Sep 20, 2013
Messages
12
Reaction score
0
Location
Algarve, Portugal
Hi everyone!
It's been a while since last time I've posted something.
But my question is for everyone who has a scangauge2 mounted.
Does any of you managed to introduce and make it work any x-gauge command?
Cause I tryed all of them and didn't work. And I know that the signal exists, cause when I used the torque app with elm327 I was able to see the values that I was trying to see with scangauge.
In the meanwhile I contacted with support and they gave me 2 codes to see what the ECU was sending to the scangauge, and asked me to provide the PID's from the ECU, in order to they can make the correct codes for the Twingo!
By the way, I have the 4.51 firmware.

Thanks!
 
You'd be best posting this to the facebook page. As no one is really active on this forum
 
I removed myself from the fb group, cause everytime I asked something nobody replyed. But to those posts about "I saw a white/blue/whatever in the street is anybody from here?", or, "oh look, what should I do to my twingo.." to that kind of posts everyone replies. So to me, that is not my kind of group, where I can get help.

But thanks anyway!
 
Top