Looking for some info gents and was recommend to this site!
So I have a k4M rally car that I'm rebuilding, was going to use the standard engine put a set of cams in it, leiightened flywheel, some head work, new clutch, and a remap.
Was hoping to get around 140bhp mark.
This giving me a good reliable engine.
Then last night I was dropped a message from another member of clio sport, telling me to get myself over to twingo133.net.
And ask a few questions about the compatibility of the 133 twingo engine.
As far as I'm aware again it's a k4m 1.6 16v lump, maybe with wilder cams and some difference in the headwork.
The question is could I drop the 1.6 twingo engine in, or are the engine mounts different and would I also need a new ecu to run it.
So I have a k4M rally car that I'm rebuilding, was going to use the standard engine put a set of cams in it, leiightened flywheel, some head work, new clutch, and a remap.
Was hoping to get around 140bhp mark.
This giving me a good reliable engine.
Then last night I was dropped a message from another member of clio sport, telling me to get myself over to twingo133.net.
And ask a few questions about the compatibility of the 133 twingo engine.
As far as I'm aware again it's a k4m 1.6 16v lump, maybe with wilder cams and some difference in the headwork.
The question is could I drop the 1.6 twingo engine in, or are the engine mounts different and would I also need a new ecu to run it.